In this article
- In brief
- Before the container: how much water?
- Is plastic bad for storing water?
- WaterBrick: what is it?
- Who is the WaterBrick for?
- The WaterBrick in 30 seconds
- Dimensions and capacity
- Weight, an underrated criterion
- The real advantage: stacking
- A modular reserve reduces some risks
- The spigot and the cap
- A versatile container, best kept for water
- Material: HDPE and food-grade compliance
- Temperatures: read the data carefully
- Organizing a distributed reserve in your home
- How many WaterBricks do you need?
- Preparing a WaterBrick for drinking water
- How long should you keep the water?
- Where should you store WaterBricks?
- WaterBrick and fuel: no
- What if a WaterBrick leaks?
- WaterBrick or conventional jug?
- Our verdict
- Frequently asked questions
How long could your household function if tap water became temporarily unavailable? A grid failure, contamination, a flood or an earthquake can cut the supply. How much water you store matters, but how you store it matters just as much: a poorly chosen, badly placed or immovable container greatly reduces the value of a reserve.
The WaterBrick takes a particular approach: instead of a large barrel or a few big jugs, it uses rectangular 13.2 L (3.5 US gal) containers designed to stack like blocks. Its main advantage is not that it keeps water better than a good conventional food-grade container, but its modularity: small units, a stackable shape, a carrying handle and the ability to spread your reserve across several spaces. This guide looks at what it is really worth, who it suits, and how to prepare, fill, store and rotate a water reserve in this type of container.
In brief
In brief. The WaterBrick is a stackable food-grade HDPE container of 13.2 L (3.5 US gal) or 6.1 L (1.6 US gal). It costs more per litre than an ordinary jug, but it fits into a small home, is easy to carry (about 12.2 kg or 27 lb full) and spreads the risk over several units. Clean and sanitize it before filling, fill it with drinking water, label it, keep it cool, away from light and frost and far from chemicals, and replace the water about every six months. Never put fuel in it.
Before the container: how much water?
In Canada, emergency kit recommendations start from a minimum of 2 L (about 0.5 gal) of water per person per day for drinking, and suggest adding 2 L more for cooking and washing when space allows, or about 4 L (about 1 gal) per person per day. This baseline covers 72 hours of self-sufficiency.
Nothing stops a household from gradually going further depending on the number of people, children, pets, heat, medical needs, access to an alternative source and available space. 72 hours is a starting point, not a limit. U.S. health authorities also suggest aiming for up to two weeks when possible.
| Level | Duration | Purpose |
|---|---|---|
| Basic | 72 hours | Cover the first days of a disruption |
| Comfort | 7 days | Prolonged outage or boil-water advisory |
| Resilience | 14 days | Gradual goal depending on space, budget and needs |
The water storage calculator works out these volumes for your household. See also calculating an emergency water supply.
Is plastic bad for storing water?
The problem is not “plastic” in general, but the choice of container. To store drinking water, favour:
- unopened commercial bottled water, considered one of the most reliable sources for a reserve;
- or a container designed for food contact, clean, durable, tightly sealing and never used for toxic products.
The right test is not “plastic or not”, but: is this container actually designed and certified for water or food? Reused milk or juice jugs, for example, are hard to clean and degrade quickly; containers that held chemicals are out of the question. See five water storage misconceptions.
WaterBrick: what is it?
The WaterBrick is a rectangular container designed for water, dry foods and other compatible non-liquid products. According to the manufacturer, the container, lid and gasket are made from BPA-free materials that meet U.S. FDA requirements for food contact. It is made in the United States and comes in several colours, including blue and tan.
Who is the WaterBrick for?
It generally costs more per litre than a simple food-grade jug. It becomes worthwhile when price is not the only constraint, mainly in three situations:
- Small homeThe flat, stackable shape uses space under a bed, in a closet or in unused nooks.
- Portable reserveA 13.2 L unit is far easier to move than a tank holding several dozen litres.
- Distributed stockSeveral small units spread water across different places and risk across several containers.
If your only goal is to store a lot of water at the lowest possible cost and space is not an issue, a conventional food-grade jug or tank is more economical. For a one-off top-up before a forecast storm, a bathtub bladder like the one covered in our WaterBOB review is another option.
The WaterBrick in 30 seconds
| Strengths | Limits |
|---|---|
| Very compact shape | Higher price than simple jugs |
| Stable cross-stacking | More caps and gaskets to check |
| Materials suited to water and food | Pouring is awkward without a spigot |
| Carrying handle | Significant weight when full |
| Wide opening, easy to clean | A large volume requires many units |
| Distributed reserve, compartmentalized risk | Not made for cheap bulk storage |
Dimensions and capacity
WaterBrick sells two main sizes. The values below are those published by the manufacturer and may change.
| Feature | Standard | Half size |
|---|---|---|
| Capacity | 13.2 L (3.5 US gal) | 6.1 L (1.6 US gal) |
| Dimensions | 45.7 × 22.9 × 15.2 cm (18 × 9 × 6 in) | 22.9 × 22.9 × 15.2 cm (9 × 9 × 6 in) |
| Empty weight | About 1.14 kg (2.52 lb) | About 0.53 kg (1.17 lb) |
| Full weight | About 12.2 kg (27 lb) | About 6.6 kg (14.5 lb) |
| Cap opening | About 8.3 cm (3 ¼ in) | About 8.3 cm (3 ¼ in) |
The half size suits a small reserve in a vehicle, someone who struggles to carry 12 kg, finer distribution in a home or a specific kit. For water in the car, see storing water in your vehicle year-round.
Weight, an underrated criterion
A 20 L (5.3 US gal) container quickly exceeds 20 kg (44 lb) when full. For an older person, a teenager, someone with physical limitations, or simply to move several units around a house, smaller containers are much easier to handle. A reserve’s total capacity matters, but so does handling it: twenty litres that nobody in the household can move create a different constraint from four small containers.
Each standard WaterBrick has a detachable handle. That lets you move part of the reserve to a vehicle, carry a container upstairs, fill a few units at an outside source or share the load among several people.
The real advantage: stacking
WaterBricks stack by crossing the units. The manufacturer indicates stacking up to about 1.2 m (4 ft) in some configurations and recommends inserting ¾-inch PVC pipe into the internal columns for safer stacks. For a home reserve, stay within those limits: a falling stack of water quickly weighs several hundred kilograms.
Stacking lets you optimize a closet, store under some furniture, use unused nooks, get better stability than a pile of loose bottles and create several small groups instead of one big stack. Always place the stack on a flat, solid surface, ideally against a wall.
A modular reserve reduces some risks
With a single large tank, a leak or contamination can affect the whole reserve. With several units, one faulty container does not affect the entire stock. This compartmentalization also lets you open one container for daily use while leaving the others sealed, which limits handling and therefore contamination risk.
The spigot and the cap
The cap is on the top face, with a wide opening that makes filling and cleaning easy. On the other hand, when pouring directly you have to tilt the container more and more as the level drops. The manufacturer offers a spigot compatible with both sizes that replaces the main cap: it is the most useful accessory when a WaterBrick becomes your daily-use container during an outage. A siphon reserved for drinking water is another option.
To limit contamination, never put hands, a cup or a utensil into the reserve. Pour or draw water without touching the inside of the container.
A versatile container, best kept for water
The manufacturer also presents the WaterBrick as a container for some dry foods. Its documentation gives, for example, about 11.3 kg (25 lb) of rice, 10.4 kg (23 lb) of pinto beans, 12.9 kg (28.5 lb) of sugar or 17.2 kg (38 lb) of salt per standard unit, depending on the product’s density. It also mentions other non-liquid items to keep dry.
That versatility is no reason to switch the same container from one use to another, however. A WaterBrick used for drinking water is best kept for that purpose. For other gear, ordinary, cheaper storage boxes are generally a better fit. For dry foods, see long-term food storage.
Material: HDPE and food-grade compliance
The WaterBrick is made of high-density polyethylene (HDPE), with an average wall thickness of about 2.3 mm (0.090 in), and a container, lid and gasket described as BPA-free. The manufacturer also highlights its impact resistance, backed by drop tests. Those tests illustrate toughness, but in a home it is mostly the condition of the cap and gasket, light, temperature and cleanliness that matter day to day.
Country of manufacture is useful traceability information, but it is not enough to determine a food container’s safety. The truly relevant criteria are material compliance, manufacturer traceability, published specifications, build quality and use in line with the instructions.
Temperatures: read the data carefully
The manufacturer publishes various resin properties, such as a brittleness point at very low temperatures and softening temperatures. These values describe the material; they do not mean you can store drinking water in extreme conditions. For a home reserve, good practice is simple: a cool place, ideally around 10 to 21 °C (50 to 70 °F), out of direct sunlight and away from fuels, pesticides and other chemicals.
Can you freeze a WaterBrick?
HDPE handles cold well, but water expands as it freezes: never completely fill a container that may freeze. For an emergency reserve, you don’t freeze it on purpose; the risk is rather accidental freezing in a garage, shed, vehicle or other unheated space in Quebec. A large reserve should therefore stay in a temperature-controlled space.
Organizing a distributed reserve in your home
The point of a modular format is being able to place water where it will be useful, rather than grouping everything in the basement. A simple plan for an apartment or a house:
- Kitchen: one unit fitted with the spigot, for daily use during an outage. It is the one you open first.
- Bedroom or main closet: the bulk of the reserve, stacked flat, away from windows and heat sources.
- Bathroom: one unit reserved for hygiene, clearly labelled, so you don’t dip into drinking water.
- Near the exit: a half-size unit ready to leave with the grab bag.
- Vehicle: a half-size unit or a few commercial bottles, rotated more often because of frost and heat.
Keep a list of locations and fill dates taped inside a cupboard door. When rotation time comes, use the water you remove to water plants, wash or fill the toilet tank rather than pouring it away, then sanitize and refill each unit one at a time, so the whole reserve is never empty at once.
How many WaterBricks do you need?
It is better to start from the self-sufficiency you want than from a universal rule. Based on the recommended Canadian figure of 4 L (about 1 gal) per person per day:
| People | 72 hours | Standard WaterBricks | 7 days | Standard WaterBricks | 14 days | Standard WaterBricks |
|---|---|---|---|---|---|---|
| 1 | 12 L | 1 | 28 L | 3 | 56 L | 5 |
| 2 | 24 L | 2 | 56 L | 5 | 112 L | 9 |
| 3 | 36 L | 3 | 84 L | 7 | 168 L | 13 |
| 4 | 48 L | 4 | 112 L | 9 | 224 L | 17 |
| 5 | 60 L | 5 | 140 L | 11 | 280 L | 22 |
| 6 | 72 L | 6 | 168 L | 13 | 336 L | 26 |
Add pets, summer heat, medical needs or fuller hygiene, and the amount rises quickly. Beyond a dozen units, compare seriously with a larger food-grade tank, or combine both: a big tank for bulk, a few WaterBricks for mobility.
Preparing a WaterBrick for drinking water
Cleaning the container, sanitizing the container and treating non-potable water are three different operations. Confusing them increases the risk of using the wrong concentration.
- CleanWash with soapy water, rinse thoroughly.
- Sanitize5 mL (1 tsp) of unscented 5 to 9% bleach per litre of water, 30 seconds of contact on all surfaces, then empty.
- Dry or rinseLet air-dry or rinse with safe water.
- FillWith water that is already safe to drink, then close the cap tightly.
- Label“Drinking water”, fill date, planned rotation date.
Should you add bleach to stored water?
Not routinely. If the clean, sanitized container is filled with drinking water from a reliable supply, there is no need to add chlorine. Making questionable water safe with chlorine is a different operation, whose dose depends in particular on the product’s actual concentration: in that case follow our guide to purifying water with bleach. Bleach also loses strength over time; see bleach concentration and storage.
For a household, unscented household bleach of known concentration or products designed specifically for water treatment are much easier references to use correctly than highly concentrated products, which add needless handling risk.
How long should you keep the water?
For containers filled at home, U.S. health authorities recommend replacing the water every six months; Canadian emergency kit documents often suggest yearly rotation of water and food. Follow the manufacturer’s and your local health authority’s directions first; failing that, six-month rotation is a cautious, easy-to-remember benchmark, for example when the clocks change.
Don’t confuse the container’s lifespan with the water’s shelf life. The manufacturer says a UV additive can extend the container’s life to about 15 years in some conditions, but the water inside still needs regular replacement. For the warranty, check the terms in effect with the seller or manufacturer at the time of purchase. See also does water really expire?
Where should you store WaterBricks?
- indoors, in a cool place;
- out of direct sunlight;
- away from gasoline, pesticides, solvents and other chemicals, whose vapours can pass through some plastics;
- on a stable, flat surface, ideally raised off concrete;
- in an accessible spot that everyone in the household knows.
What about outdoors?
Outdoors is not a good first choice in Quebec: frost, summer heat, sunlight, container degradation, difficult access and wide temperature swings. A tarp limits direct light but does not solve the temperature problem. If part of the reserve must stay in a garage or unheated space, inspect it more often.
Blue or tan?
Colour is not a deciding factor for water. At home, clear identification matters more: a reserve should be easy for everyone to recognize. Labelling each container with its use and fill date adds more value than visual discretion. Blue is also the common convention for drinking water containers.
WaterBrick and fuel: no
The manufacturer clearly states that WaterBricks are not designed for fuels or oils. A food container is not a fuel container: gasoline, diesel, kerosene and other petroleum products require containers approved and labelled for that use. And a container that has held fuel must never be used for water again.
What if a WaterBrick leaks?
- Check that the gasket is present and properly seated.
- Inspect it for cracks or deformation.
- Clean the contact surfaces.
- Refit the cap following the instructions, without forcing the thread.
- Test with water, with the container lying on its side.
- Replace the gasket or the container if it is still faulty.
Don’t add grease, oil or any other substance to the drinking water contact area to hide a leak.
WaterBrick or conventional jug?
| Criterion | WaterBrick | Conventional food-grade jug |
|---|---|---|
| Cost per litre | Generally higher | Often lower |
| Stacking | Excellent | Variable |
| Carrying | Very good | Depends on volume |
| Small spaces | Excellent | Variable |
| Gaskets to check | More of them | Fewer |
| Risk spreading | Very good | Depends on the number of jugs |
| Bulk storage | More expensive | Often cheaper |
Our verdict
The WaterBrick is not “the best water storage system on the market”. It is a particularly worthwhile system when modularity has value: a Montreal apartment, a condo, a household that needs to spread its reserve, someone who doesn’t want to handle big jugs. For a property with plenty of space where cost per litre is the priority, other solutions are more rational.
The best water container is not the one that holds the most, but the one that lets your household keep enough water, in good conditions, in an accessible place and in a form it can actually use. And if the reserve runs out, a way to treat water takes over: see choosing a survival water filter.
Frequently asked questions
How much does a standard WaterBrick hold?
About 13.2 L, or 3.5 US gallons. The half size holds about 6.1 L, or 1.6 US gallons.
How much does a full WaterBrick weigh?
About 12.2 kg (27 lb) for the standard model filled with water, according to the manufacturer.
Are WaterBricks BPA-free?
According to the manufacturer, the container, lid and gasket are BPA-free and meet FDA requirements for food contact.
How much water should you store per person?
At least 2 L per person per day for drinking, and ideally 4 L (about 1 gal) including cooking and hygiene, for at least 72 hours. More if possible.
How often should you change the water?
About every six months for water filled at home; some Canadian recommendations suggest yearly rotation. The manufacturer’s and local health authority’s directions take priority.
Should you add bleach to a WaterBrick?
The container is cleaned and sanitized before filling. If it is then filled with water that is already safe, there is no need to add chlorine. Treating questionable water follows a different procedure.
Can you store fuel in it?
No. The manufacturer states that these containers are not designed for fuels or oils.
Can you stack WaterBricks very high?
Stay within the manufacturer’s limits, about 1.2 m (4 ft) depending on the configuration, with PVC pipe in the columns for extra stability.
