In this article
  1. Our take in short
  2. Specifications
  3. What’s in the box
  4. Build quality
  5. Carry
  6. Battery and charging: the main constraint
  7. Modes and runtime
  8. The interface
  9. The beam
  10. Warrior X Pro or Warrior X?
  11. Where does it fit in a preparedness kit?
  12. Strengths and limitations
  13. The verdict
  14. Frequently asked questions
  15. Sources
Olight Warrior X Pro in Desert Sunset finish
The Olight Warrior X Pro, shown here in the Desert Sunset finish.

The Olight Warrior X Pro is a high-output light: 2,100 lumens claimed and a 500 m throw. It is aimed at people who need to see far outdoors: hunting, outdoor activities, large properties, night searches. This review covers its build, interface, runtime and real limits, starting with its proprietary battery, a point to weigh carefully before buying.

Our take in short

In short. The Warrior X Pro is sturdy, powerful and complete out of the box: 2,100 lumens verified, fast 2 A magnetic charging, a very intuitive two-stage switch and a pleasant neutral white tint. On the other hand, it depends on a proprietary 21700 battery, Turbo lasts only 2 minutes before stepping down, it has only two levels and it is too big for a pocket. It is a good outdoor lighting tool, not a versatile home light.

Specifications

FeatureOlight Warrior X Pro
EmitterCree XHP35.2, neutral white
Reflectorsmooth, compact hotspot
Claimed maximum output2,100 lumens
Claimed intensity62,500 candela
Claimed throw500 m (1,640 ft)
BatteryOlight 5,000 mAh 21700, proprietary (included)
ChargingMCC3 magnetic cable (2 A) on the tail
Switchelectronic two-stage tail switch
Water resistanceIPX8
Drop resistance3 m (9 ft 10 in)
Length149 mm (5.87 in)
Head diameter39 mm (1.54 in)
Body diameter26.2 mm (1.03 in)
Weight239 g (8.43 oz)

What’s in the box

  • the Warrior X Pro, with its battery;
  • a stainless steel pocket clip;
  • an MCC3 magnetic charging cable;
  • a tactical grip ring;
  • a lanyard;
  • a carrying holster;
  • the manual.
Warrior X Pro box contents
Everything is included: nothing extra to buy.

Build quality

The light is made of anodized aluminum. Our unit’s Desert Sunset finish has a dark, glossy gradient. The threads are long, anodized and smooth, which helps water resistance.

The head is designed to shed heat, which matters on a 2,100-lumen light, even though that output lasts only two minutes. It has a crenellated bezel, typical of the Warrior series. The body knurling is pronounced and grips well, even with gloves. The light can stand on its head or tail to bounce light off the ceiling for ambient lighting.

Knurled body of the Warrior X Pro
The body knurling, designed for a gloved grip.
Warrior X Pro smooth reflector
The smooth reflector, which focuses the beam for long throw.

Carry

At 149 mm and 239 g, the Warrior X Pro is neither a discreet pocket light nor a big searchlight. The included semi-rigid nylon holster, MOLLE-compatible with a magnetic closure, is the most practical option for outdoor use. The stainless steel clip holds well. Two rings are offered: a silicone one, more comfortable, and an aluminum one that also locks the clip in place.

Warrior X Pro in its holster
The included MOLLE-compatible holster.
Warrior X Pro held in hand
In hand, the tail switch falls under the thumb.

Battery and charging: the main constraint

The light uses a 5,000 mAh 21700 battery supplied by Olight. It is not a standard 21700: the head uses a dual contact (central positive spring and outer negative ring) that requires a matching cell. A regular 21700 will not work.

Warrior X Pro 5,000 mAh 21700 battery
The 5,000 mAh 21700 battery, specific to Olight.

Charging happens inside the light, through the 2 A MCC3 magnetic cable on the tail: twice as fast as the original Warrior X cable. The cable snaps on easily. For occasional use, this system works fine; for anyone managing several 21700 devices or wanting to swap batteries quickly during a crisis, it is a real drawback.

MCC3 magnetic cable on the Warrior X Pro tail
The MCC3 magnetic cable attached to the tail.

Modes and runtime

ModeClaimed outputClaimed runtime
Turbo2,100, then 1,000, then 300 lumens2 min, then 100 min, then 23 min
Low300 lumens8 h

There is no strobe, SOS or beacon. The lowest level is 300 lumens: a lot for moving around a house during an outage, and runtime suffers for it.

The interface

StateActionResult
OffLight press and holdMomentary Low
OffLight clickLow
OffFull press and holdMomentary Turbo
OffFull clickTurbo
LowFull clickTurbo
LowLight pressOff
TurboClickOff

The redesigned switch gives a crisp, predictable click. The two stages give direct access to Turbo without cycling through modes: easy to use under stress or with gloves. The light also signals battery level by vibration.

The beam

The Cree XHP35.2 emitter combined with the smooth reflector gives a well-defined hotspot surrounded by usable spill. The neutral white tint is pleasant, without excess blue. It is a beam built for distance.

Warrior X Pro beam at night on houses
At night, the beam reaches houses at a good distance.

Warrior X Pro or Warrior X?

The X Pro is not just a cosmetic update. It moves to the Cree XHP35.2 emitter, a 5,000 mAh battery, twice-as-fast charging (2 A MCC3) and a revised tail switch. See also our Warrior X review.

Warrior X Pro next to another Warrior light
The Warrior X Pro next to another light in the series.

Where does it fit in a preparedness kit?

  • Who it suits: rural areas, large properties, hunting, night hiking, searching for a person or animal at a distance.
  • Who it suits less: in a city or apartment during an outage, a headlamp and a lantern with low levels and long runtime will be more useful.
  • Redundancy: keep a second MCC3 cable and a power bank, and a light that runs on common batteries.

As with any very powerful light, never point it at someone’s eyes or at a driver.

Strengths and limitations

Warrior X Pro: the verdict
  1. Strengths2,100 lumens verified; 500 m throw; rugged build, IPX8; intuitive two-stage switch; 2 A magnetic charging; pleasant neutral white; complete box; vibration battery indicator.
  2. LimitationsProprietary 21700 battery; proprietary magnetic cable; 2-min Turbo; only two levels, lowest at 300 lumens; no strobe or SOS; too big for a pocket.

The verdict

The Warrior X Pro is well built, powerful and complete out of the box. It suits regular outdoor use, hunting, night hiking, or a preparedness context where seeing far is a real advantage. Its proprietary battery is its only fundamental drawback: if you want to swap or stock standard batteries, look at other models; otherwise it will do its job very well, alongside a headlamp and a light that uses common batteries.

Frequently asked questions

Can I use a regular 21700 battery?

No. The head’s dual contact requires the Olight battery. A generic 21700 will not work.

Is it a good light for a power outage?

It can help, but its lowest level is 300 lumens, with 8 hours of runtime. For a multi-day outage, a headlamp and a lantern with low levels are more efficient.

Should I replace a Warrior X with an X Pro?

Only if the extra output, throw and faster charging really matter to you. The Warrior X is still a useful light.

Transparency. Our original review dates from 2021. Specifications come from Olight and may have changed since, including the emitter used. Check the manufacturer’s page before buying.

Sources

  • Olight, Warrior X Pro product page and manual (specifications, modes, interface).
  • PrépaCivile, review of the tested unit: photos, build, beam and maximum output check.

Go further: our reviews of the Warrior X Turbo and the Warrior 3, the Power outage fact sheet and the emergency equipment builder.