In this article
  1. Why is a chest wound so dangerous?
  2. What does a chest seal do?
  3. Vented or non-vented seals: what’s the difference?
  4. Applying a chest seal, step by step
  5. Monitoring the person and “burping” the seal
  6. Improvising an occlusive dressing
  7. Common mistakes
  8. Which kit should it go in?
  9. Frequently asked questions
  10. Further reading
  11. Sources

Medical disclaimer: this article is published for information and preparedness purposes. It does not replace recognized first aid training (Canadian Red Cross, St. John Ambulance, workplace first aid courses) or the advice of a health professional. If someone has a chest wound, call 911 immediately and follow the dispatcher’s instructions.

A penetrating chest wound is one of the most serious injuries a lay rescuer can face: a stab wound, a fall onto a sharp object, a worksite accident, impalement in a car crash. Within minutes, air entering through the wound can interfere with breathing to the point of endangering the person’s life. The occlusive chest dressing, usually sold as a “chest seal”, is a simple tool that helps limit this risk until help arrives.

This guide explains how a chest seal works, when to use it, how to apply it correctly, the differences between vented and non-vented models, and how to improvise if you don’t have one. It also covers its limits: a chest seal does not treat the injury, it only buys time.

Why is a chest wound so dangerous?

The lungs work through a pressure difference. Each time you breathe in, the chest expands, pressure inside the chest drops and air flows in through the windpipe. The lungs are surrounded by a thin lining, the pleura, which creates a sealed space between the lung and the chest wall.

When a wound goes through the chest wall, that space is no longer sealed. With each breath in, air can be drawn directly through the wound rather than through the mouth and nose. This air builds up between the lung and the chest wall: this is a pneumothorax. The affected lung can no longer inflate normally and breathing becomes more and more difficult.

In some cases, air gets in with every breath but cannot get out. Pressure then rises inside the chest, compressing the lung and then the heart and major blood vessels: this is a tension pneumothorax, a life-threatening emergency that can be fatal quickly without medical treatment.

Warning signs

  • a wound to the chest, upper back, base of the neck or upper abdomen (below the ribs);
  • a sucking or hissing sound at the wound with each breath;
  • blood or froth bubbling from the wound;
  • rapid, laboured or painful breathing;
  • bluish lips, agitation, confusion or growing drowsiness.

A wound that “sucks” air is not always noisy. To be safe, treat any penetrating chest wound as one that could let air in.

What does a chest seal do?

A chest seal is a flexible, airtight sheet covered with a very strong adhesive designed to stick to wet or bloody skin. Once placed over the wound, it stops outside air from entering the chest with each breath.

It is important to understand what it does not do:

  • it does not stop major bleeding (for that, use direct pressure and, depending on the situation, a pressure dressing);
  • it does not remove air that is already in the chest;
  • it does not replace hospital care, which remains essential.

It is a stabilizing measure: it reduces the worsening of the pneumothorax during the minutes between the injury and the arrival of paramedics.

Vented or non-vented seals: what’s the difference?

There are two main families of chest seals in first aid kits and from medical suppliers.

TypeHow it worksAdvantagesThings to watch
Non-ventedSolid sheet that completely closes the woundSimple, inexpensive, quick to apply, no orientation neededAir already inside cannot escape: close monitoring and sometimes “burping” required
VentedSheet with a valve or channels that let air out but not inReduces the risk of air building up under the sealThe valve can clog with blood; some models require centring the valve over the wound

Recent international guidance in tactical first aid favours vented seals when available, but a properly monitored non-vented seal is still far better than no protection at all. For a family or vehicle kit, the key is to carry two seals: a gunshot wound or a penetrating object may leave both an entry and an exit wound.

Common models

Several models are sold in Canada and Europe. Some are a simple round adhesive sheet, others have a small chimney that acts as a one-way valve, and others use channels spread across the whole surface, so the valve does not need to be lined up exactly with the wound. Whatever the model, check the expiry date: the adhesive loses strength over time and with heat.

Applying a chest seal, step by step

These steps are learned in hands-on training. Reading them is not enough, but knowing them in advance helps you stay calm when it matters.

  1. Make the scene safe. Check that the danger is over (attacker, traffic, falling objects). Do not put yourself at risk.
  2. Call 911 or have a bystander call, saying it is a chest wound.
  3. Protect yourself. Put on gloves if you have them.
  4. Expose and look for every wound. Cut or lift clothing. Check the front and back of the chest, the armpits and the base of the neck: an exit wound is easy to miss.
  5. Cover the wound immediately with your gloved hand while you prepare the seal, to limit air entry.
  6. Wipe around the wound with gauze to remove blood and sweat: the adhesive has to stick to skin.
  7. Apply the seal at the end of a breath out, if possible, when the chest holds the least air. Centre it over the wound (and line up the valve if your model requires it), then press firmly all around the edge.
  8. Treat the second wound if there is one, with a second seal.
  9. Position the person however they breathe best. A conscious person often chooses to sit or half-sit. If they lose consciousness, place them in the recovery position, injured side down if possible.
  10. Monitor continuously until help arrives.

Monitoring the person and “burping” the seal

After applying the seal, monitoring is just as important as the seal itself. Watch the rate and effort of breathing, lip colour, level of consciousness and the person’s behaviour.

If breathing gets worse (increasing shortness of breath, agitation, drowsiness, bluish lips), air may be building up under the seal. With a non-vented seal, or if the valve is clogged with blood, training courses teach you to briefly lift one corner of the seal to let air escape, then press it back down. This is sometimes called “burping” the seal. If the person does not improve, tell the 911 dispatcher immediately: needle decompression is a medical procedure reserved for professionals.

Improvising an occlusive dressing

If you don’t have a chest seal, you can improvise one with any airtight material:

  • the plastic wrapper from a sterile gauze pad or dressing (the inside surface is clean);
  • a clean freezer bag, plastic food wrap or a cut-open exam glove;
  • a plastic card as a last resort.

The piece should extend well beyond the edges of the wound, at least 5 cm (2 in) on every side. Secure it with strong tape, such as wide medical tape or duct tape. Some courses recommend leaving one side untaped to create a crude valve; others prefer taping all four sides and burping as needed. Follow the method taught in your training.

Common mistakes

  • Missing the exit wound on the back or under the arm.
  • Applying the seal to skin wet with blood: it peels off within minutes.
  • Ignoring the bleeding: a heavily bleeding wound also needs pressure.
  • Removing an impaled object from the chest: never remove an impaled object; stabilize it and wait for help.
  • Stopping monitoring once the seal is on.
  • Keeping expired seals in the kit: the adhesive ages badly, especially in a vehicle exposed to cold and heat.

Which kit should it go in?

A chest seal belongs in an advanced first aid kit: vehicle kit, cottage or remote camp kit, workshop or worksite kit, hunting kit. For a household, two seals are usually enough, along with gloves, gauze, a pressure bandage and blunt-tip shears. Store them flat, away from heat, and note their expiry date in your kit checklist.

Having the equipment without knowing how to use it gives a false sense of security. A first aid course that covers bleeding control and chest wounds is the best investment you can make in your kit.

Frequently asked questions

Can applying a chest seal make the injury worse?

The main risk is air building up under an airtight seal. That is why monitoring and, if needed, burping are essential. Applying a seal to a wound that turns out not to reach the chest cavity does no particular harm.

Does a family kit really need a chest seal?

It is not the top priority for a basic kit, which should first handle small cuts, burns and bleeding. But in a vehicle kit or a kit for a cottage far from emergency services, it takes up little space and can make a big difference.

Can a regular dressing replace it?

No. Gauze lets air through. You need an airtight material, such as a plastic sheet, sealed all around the edges.

Further reading

To build a complete kit and know what to do with it, see our guide to first aid kit contents and organization and our article on the first aid skills to master.

Sources

  • Canadian Red Cross — First Aid and CPR Manual.
  • St. John Ambulance — Standard and Emergency First Aid programs.
  • Committee on Tactical Combat Casualty Care (CoTCCC) — guidelines on open chest wounds.
  • American College of Surgeons — Stop the Bleed and initial trauma care.